No fancy bullshit, the Jääkäripuukko is simply a proper no-nonsense utility knife. These come in various sizes. Jääkäripuukko 110 is an excellent all-round knife for just about any tasks, it’s best paired up with something bigger such as an axe or the Skrama. Quality carbon steel, traditional Finnish puukko blade profile with a slight drop point. The Jääkäripuukko is not designed to sit on a shelf for decoration, this is an honest tool made for hard work.

Blade

Traditional and proven functional Finnish puukko profile with a drop point. The thickness of 4,2 mm / 0.17″ makes this a bit more robust than most old-timey traditional Finnish puukkos. The profile is a Scandi grind with a tiny secondary bevel, currently the most commonly used style in Finnish puukkos.
The strong blade can take a beating, you can use the Jääkäri for batoning without a problem, just don´t hit your fingers, unless yours are strong like steel.

80CRV2 CARBON STEEL AND HEAT TREATMENT

All Terävä carbon steel knives are made from 80CrV2 tool steel, a trusted choice in Finnish knife manufacturing for decades. The heat treatment leaves the surface of the steel softer, ~52 HRC. This creates a tough exterior to protect the blade. As the blade is ground, the harder (~59 HRC) inside is revealed and improves edge retention. The spine has ground bevels for striking Ferro rods.
The blades have blemishes and stains due to the manufacturing process. These are harmless and can be removed if they bother you.

CARE OF A CARBON STEEL BLADE

Carbon steel is easy to sharpen and maintain – you just have to remember to do it. If your knife gets wet in the bush, dry it the best you can. Never store the knife without drying and oiling the blade. Cooking oils are fine for this purpose.

The rubber grip is somewhat ergonomically shaped, but not one of those crazy finger groove things. A small finger guard on the front, a little belly in the middle, and a knob at the back to keep your hand from slipping and also make it possible to use a Leuku style chopping grip.
The tang runs all the way through the grip and comes out the back, forming a little knob with a hole in it for lanyards and such. The knob can also be used to hit things, naturally.

Sheath: shinobykydex sheath with clip

Blade: 4.3inches

Handle: 5.1inches

Thickness 0.17″

Steel: 80crv2

Hardness: 59hrc